Nodopedia

Rotation-Speed Nodon

I know how fast you've been spinning your console or your Joy-Con...and the axis and the direction too! I know a lot about spinning!

Port

Input

None

Port name	Port function	Output value
Rotation speed	Outputs the speed that the Joy-Con or console is rotating at. When the console's rotation is being checked, 2.50 rotations per second will result in an output of 1.00. In the case of the Joy-Con, 5.00 rotations per second will result in an output of 1.00.	When Direction is set to ＋/－: Between -1.00 and 1.00 When Direction is set to ＋ or －: Between 0.00 and 1.00

None

Determines which controller will be checked.

Setting value	Description
Auto	Automatically switches the target to be checked, depending on which controller is connected. See also: Automatic Switching between Controllers
 Joy‑Con (L) Joy‑Con (R)	Checks the specified target.

Select which controller to check.

This setting is only available when Check What? is set to Joy-Con.

Sets how the raw input will be converted before being sent as output.

Setting value	Description
Digital	Outputs either 1.00 if the value is within the specified range or 0.00 if it's outside the range. It's judged to be within range if it's equal or less than the upper value of the range and equal or more than the lower value.
Analog	Passes on any input that falls within the specified range, converted to a value between 0.00 and 1.00 (as opposed to either 0.00 or 1.00).

Sets which axis of rotation to check.

Setting value	Description
X/Y/Z	Outputs the speed of the rotation around the specified axis.
Any direction	Outputs the highest speed of rotation around any axis.

Sets which direction of rotation to check.

Setting value	Description
＋	Reacts only when rotation is in a positive direction.
－	Reacts only when rotation is in a negative direction.
＋/－	Reacts when rotation is in either direction.

Go back home