NodopediaAngle → Position Nodon
So, I output sines and cosines.
Just don't ask me what any of that means...
Port
Input
| Port name | Port function | Input operation |
|---|---|---|
| Angle | The input received at this port will be used as an angle to calculate the location. Measured in degrees (°). | Loops between -180.00 and 180.00 |
Output
| Port name | Port function | Output value |
|---|---|---|
| Horizontal position | Using the value received at the angle port, this calculates the location of the angle on a circle with a radius of 1.00, then outputs the horizontal location. This will be the cos (cosine) of the angle. | Between -1.00 and 1.00 |
| Vertical position | Using the value received at the angle port, this calculates the location of the angle on a circle with a radius of 1.00, then outputs the vertical location. This will be the sin (sine) of the angle. | Between -1.00 and 1.00 |
Connection
None
Settings
None
← Previous
Position → Angle Nodon
Go back home
Next up →
Angle-Difference Nodon